20 Best Engineering Program Manager jobs (Hiring Now!)

Launch Manager
Lydech Thermal Acoustical —Hamptonville, NC
Must have four years technical studies in engineering or a related discipline. Bachelor’s degree in engineering or a technical discipline.
$120,000 - $130,000 a year
Quick Apply
Software Engineer - Program Manager
Torch Technologies, Inc. —Sterling Heights, MI
Experience in military ground air, or naval vehicles type certification and material release. Reviewing contractor performance specifications | requirements and…
Estimated: $130K - $165K a year
Program Manager
Nevada Automotive Test Center —Silver Springs, NV
The PM should also have extensive engineering experience in a related field, and should be able to apply their knowledge and experience across all disciplines…
From $100,000 a year
Quick Apply
Program Manager, MicroGrids
VoltaGrid, LLC —Houston, TX
Identify potential project risks and develop risk mitigation strategies to minimize their impact on project outcomes.
Estimated: $113K - $143K a year
Quick Apply
Program Manager
Ascential Medical & Life Sciences —Andover, MN
Bachelor’s degree in engineering, business administration or related field. The Program Manager responsible for leading and managing all activities required to…
Estimated: $99.5K - $126K a year
Quick Apply
Program Manager
Jedco Inc. —Grand Rapids, MI
Bachelor’s degree in engineering or business preferred. Monitor and manage tooling budgets to stay within budget. Reports To: *V.P. of Engineering.
Up to $120,000 a year
Quick Apply
7d
Design Engineer
The Shyft Group —Bristol, IN
You will also be accountable for driving new product improvement and new product development projects, maintaining legacy products, and overseeing the…
Estimated: $73.7K - $93.3K a year
8d
STEM Director
Boys & Girls Clubs of Metro South —Brockton, MA
BA/BS from an accredited college or university in a relevant field of study, preferred. Develop and implement high-quality STEM programs and activities –…
$50,000 - $55,000 a year
Quick Apply
Manager Program Engineer
Austal USA —Mobile, AL
Responsible for organizing engineering team to meet program technical, schedule and cost requirements. Minimum 10 years of shipyard design and construction…
Estimated: $101K - $128K a year
Quick Apply
High Voltage Program Manager
ENGIE North America Inc. —Houston, TX
Must possess a valid U.S. driver’s license/clean driving record Must be willing and able to comply with all ENGIE ethics and safety policies.
$112,000 - $172,500 a year
6d
Senior Program Manager (Civil, Electrical, Mechanical Engineer)
CGL Companies —Kansas City, MO
Must have a valid driver’s license. DL NUMBER - Driver's License, Valid and in State Must have a valid driver’s license. Participates in RFQ/P preparations.
Estimated: $109K - $138K a year
Quick Apply
Program Manager
Fuyao Glass America Inc —Moraine, OH
Program Manager works with the Product Development Engineer and Advance Quality Engineer to quote, develop and launch new automotive glass products for OEMs.
Estimated: $81.4K - $103K a year
Technical Program Manager
TYAN Computer Corp —Newark, CA
Provide technical guidance and direction to engineering teams. Your role is crucial in driving innovation, maintaining schedules, managing risks, and delivering…
$100,000 - $130,000 a year
Quick Apply
Manager Electronics Engineering 2
Northrop Grumman —Baltimore, MD
Minimum 7 years of related engineering experience including responsibility as an integrated product team or technical lead.
$145,000 - $217,400 a year
Process Engineer
Fritz Winter North America LP —Franklin, KY
Support operations and maintenance functions with technical work instructions and diagnostic tools. Knowledgeable in product design and development and in the…
$72,000 - $96,000 a year
Quick Apply
Engineering Program Manager, NPD
Vita-Mix —Olmsted, OH
The Program Manager is responsible for driving the successful delivery of cross-functional projects on time, on budget, and with adherence to quality standards…
Estimated: $111K - $140K a year
Quick Apply
1d
Program Manager
Mitchell Plastics —Sterling Heights, MI
Provides data and cost information to manufacturing group to develop end of arm tools, masks, and assembly equipment. Has a degree in Engineering.
Estimated: $104K - $132K a year
Quick Apply
14d
Substation Engineer (Eng. Proj Mgr III/Sr. Eng. Proj Mgr) Salt Lake City, UT #111868
PacifiCorp —Salt Lake City, UT
Negotiate with vendors and contractors regarding work scope changes and ensure that all contract commitments are completed on time per the scope of work and…
Mechanical Engineer IV NSWCPD
Strategic Technology Institute, Inc. (STi) —Philadelphia, PA
Graduate of military schools providing in-depth knowledge of naval shipboard systems maintenance and operation, or a graduate of a trade, industrial, or…
$96,495 - $102,855 a year
Quick Apply
3d
Infrastructure Program Manager/Engineer
Sustainability Partners —Honolulu, HI
Visit project sites in person as required; must have a working vehicle and valid driver’s license. Identify and develop solutions for potential technical or…
$90,000 - $100,000 a year
Quick Apply

I want to receive the latest job alert for Engineering Program Manager

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Launch Manager

Lydech Thermal Acoustical - Hamptonville, NC

Quick Apply

Job Details

Full-time $120,000 - $130,000 a year

Benefits

Health savings account
Health insurance
Dental insurance
401(k)
Paid time off
Vision insurance
Referral program

Qualifications

Microsoft Powerpoint
Program management
Microsoft Excel
Management
CAD
Engineering
APQP
GD&T
3 years
Analysis skills
Project management
Bachelor's degree
Product development
Automotive engineering
Computer skills
Manufacturing
Financial acumen
Communication skills
Time management

Full Job Description

Launch Manager

Location: Hamptonville, NC

Lydech is proud to be an equal opportunity workplace and is an affirmative action employer.

The Thermal Acoustical Solutions segment offers a full line of innovative engineered products to assist in noise and heat abatement within the automotive and industrial markets. The business manufactures acoustical damping and thermal insulating solutions comprised of fiber and metal based composite product constructions. These products are typically found in the interior (dash insulators), underbody (wheel well, fuel tank, exhaust) and under hood (engine compartment) of passenger vehicles, heavy duty trucks, recreational vehicles as well as in other industrial applications. The segment employs approximately ~1400 employees with operations in the U.S., Germany, France and China.

Job Summary:

This position is responsible to manage the industrialization of production tooling and equipment processes to ensure new products launch on time and on budget and to customer and corporate expectations. The Launch Manager is the leader for Phase Gates 3, 4 and 5 – Trial Development & Process Lock, Run at Rate and PPAP Approval, and SOP+90 days Budget Review & Lessons Learned. The Launch Manager will support the Project Manager during Phase Gates 1 and 2 – Program Award & Design Freeze, and Process and Tooling Design.

Job Duties:

Develop/design tooling – Work withtooling suppliers to assure that the purchased tooling and equipment meets the required tolerances, can produce at the rate required/quoted, causes an acceptable amount of scrap, and fits within the existing equipment (bed size, shut height, open height, bolt pattern, tonnage, etc.). Utilize direct support from resources in Lydech’s Tooling Group during the design and development of production tooling. Conduct Runoff/Trials for tooling and dedicated equipment to ensure all requirements are met for Gate 3 and 4.
Manage timeline – manage the timing for tooling and equipment such that the required milestones are met based on customer requirements as they were defined at the quoting and sourcing phases. Modify and manage timing as the project scope changes due to customer modifications. (Note: overall project timing unless customer changes scope.)
Manage budget – successfully launch project within the quoted budget.
Manage open issues and tasks list – Drive project through APQP meetings in which open issues and required tasks are coordinated through the cross functional team. (R&D Eng., Manufacturing, Process Eng., Quality Eng., DSTC, Operations, Purchasing, Finance, etc.).
Track/manage all PPAP activities – coordinate the completion of process flows, control plans, work instructions, capability analysis, material specifications, etc. Drive core Team members that are responsible for each task, as well as support and participate in the development of this documentation when needed.
Run internal/external trials – coordinate the scheduling of the line, labor, and procurement of materials until the part is fully launched into production. Initiate and oversee the trial until complete or until acceptable based on the complexity of the trial.
Coordinate/submit all internal documentation – Ensure BOM’s and Routings, and all units within, are correct per the pre-production trials. Ensure pre-production Trials are planned and occur on-time in support of Gate 3 and Gate 4 milestones.
Quote new projects – Support quoting based on review of customer supplied data and requirements and the capability of the existing equipment and processes. Work with process engineering to determine capital requirements if project will not work within existing processes. Obtain tooling quotes from suppliers with support from resources in Lydech’s Tooling Group.
Reconcile actual and quoted costs – Track and confirm that production costs due to tool scrap rates, material usage and throughput rates are equivalent or better than those originally quoted. If costs are higher, develop, manage and implement action plan to achieve quoted costs.
Customer print – Support review of customer drawings with Novi Design Center and accept or reject the print based on process capabilities. Confirm part will meet all test requirements and specified GD&T.
Submit for testing – submit parts or material for testing based on customer requirements.
Coordination of tool shipments.

Education, Experience, Skills and Abilities Required for Consideration as a Candidate:

Must have four years technical studies in engineering or a related discipline.
Must have at least three years of project management/launch management experience in automotive industry.
Must have a working knowledge of GD&T.
Must have a working knowledge of the APQP process and requirements for automotive PPAP.
Ability to multitask and meet stringent deadlines, with effective time management skills.
Ability to be an effective communicator across all levels of the business,
Well-organized with good time management skills to work independently. Demonstrated computer skills; Excel, Word, PowerPoint, Project.
Proven self- starter with good decision-making skill.
Financial acumen

Preferred Experience/Education:

Bachelor’s degree in engineering or a technical discipline.
Automotive application engineering / program management experience at a Tier I automotive supplier.
Knowledge/experience in metal stamping products/processes.
Knowledge/experience in molded fiber products/processes.
Knowledge/experience in CAD/CAE design/analysis capability.
Understanding of product development and validation methods (i.e., testing, FEA, DVP, DFMEA)

Job Type: Full-time

Pay: $120,000.00 - $130,000.00 per year

Benefits:

401(k)
Dental insurance
Health insurance
Health savings account
Paid time off
Referral program
Vision insurance

Schedule:

8 hour shift
Day shift
Evening shift
Night shift
Overtime

Experience:

Project Management/Launch: 3 years (Required)
Automotive Manufacturing: 4 years (Required)
GD&T: 3 years (Required)

Ability to Relocate:

Hamptonville, NC 27020: Relocate before starting work (Required)

Work Location: In person

Quick Apply

Engineering Program Manager jobs

Launch Manager

Software Engineer - Program Manager

Program Manager

Program Manager, MicroGrids

Program Manager

Program Manager

Design Engineer

STEM Director

Manager Program Engineer

High Voltage Program Manager

Senior Program Manager (Civil, Electrical, Mechanical Engineer)

Program Manager

Technical Program Manager

Manager Electronics Engineering 2

Process Engineer

Engineering Program Manager, NPD

Program Manager

Substation Engineer (Eng. Proj Mgr III/Sr. Eng. Proj Mgr) Salt Lake City, UT #111868

Mechanical Engineer IV NSWCPD

Infrastructure Program Manager/Engineer

Job Seeker Tools

Employer Tools

Browse

Stay Connected